The enterprise version of the UAS Sentry POE (Power Over Ethernet) Receiver is currently in Beta testing.
The enterprise POE receiver has the following capabilities:
- Designed to provide 24 x 7 monitoring
- Monitors traditional Wifi (2.4) and also Bluetooth
- Drones detected will be uploaded to the UAS Sentry Cloud
- The ability to also notify you via push notification to your phone / watch is possible
- You can view the drone activity by going to UasSentry.com/map
- You have the ability to configure the receiver via an iPhone (Android currently in development).
- Over the Air updates are possible if the unit is configured to be on a 2.4G Wifi network / hotspot.
- Triple redundancy on getting the data to the UAS Sentry cloud
- Ethernet
- Wifi
- Smart Phone (IOS)
- Internal signal amplifier to allow external antenna to be connected via coax cable
- LED to indicate drone activity (Green no drone activity, solid red indicates drone is in the perimeter, flashing red indicates drone is approaching perimeter).
- Ability to configure the unit via a web page. This capability is coming soon and when available you will be the first to utilize it.
- Cache hundreds of drone sightings if the Internet connection is down.
- The unit has custom mounting hardware to make it easy to connect to a pole or a flat wall.
- As of 11/20/23, the UAS Sentry has detected the following drones:
Autel EVO Max, Autel Nano, BlueMark db120, DJI Air 2, DJI Ai2 2S, DJI Air 3, DJI FPV, DJI Inspire 3, DJI M300 RTK, DJI M30T, DJI M3E, DJI M3T, DJI Mavic 3, DJI Mavic 3 Cine, DJI Mavic 3 Classic, DJI Mavic 3 Pro, DJI Mini 4 Pro, DJI Mavic 2 Enterprise Advanced, DroneTag Beacon, DroneTag Mini, Holystone HSRID01, uAvionix pingRid
Things you need to be aware of:
- Case is NOT waterproof so it must stay inside. We are still working on the design to make it waterproof.
- We are constantly improving the design of the case. The case you receive may look different (better) than the case shown in the photo above.
- You are responsible for providing the coax cable, the antenna, and power injector (only needed if you don't already have POE). We recommend the following:
We have had very good results with the above cables and antennas. We have detected drones out over 5 miles with the large antenna and over 4 miles with the small antenna connected to a 50 foot coax cable (your results may vary because environment will affect results).
We strongly recommend having the unit connected to a hard wired data connection. However, if you do not want to do this and just want to power the unit via a power injector and rely on Wifi for all the data communication then that is OK.
We have detected drones close to 4 miles with the antenna mounted in an attic of a home (wood frame, cement shingles).
We have detected drones close to 4 miles with the antenna mounted in an attic of a home (wood frame, cement shingles).
Every unit is currently handbuilt and tested and the supply is very limited.
The enterprise units are targeted to retail for $4,995.
Approved bata testers can purchase ONE for $795 (84% off retail)
If you are interested in participating please reach out via our Contact Us link.
If you are approved we will build a unit (it may up to two weeks) for you. You do not need to make a payment until the unit is ready to ship.
If you are approved we will build a unit (it may up to two weeks) for you. You do not need to make a payment until the unit is ready to ship.